TC80-CCL
DIN rail mount torque converter with CC-Link interface
Product outline
- TC80-CCL is a compact torque converter.
- Compatible with rotary encoder option (UTMⅡ(R)/ UTMⅢ(R)) too!
- UTM III / UTF digital output can be read, and make noise resistance tester.
- Torque data (hold value) is stored up to 100, and data can be read.
Lightweight and compact body to fit into limited space in a control panel
Light weight & compact body for 35mm DIN rail mount
Application software for USB interface
With communication through USB interface,
graph display, reading hold data,
setting parameters, and calibration can be done.
Specifications
Analog section｜Display section｜External signal｜Interface｜General performance｜Attachments
| Analog section | |
| Signal input range | -10 to +10V (UTMⅢ/UTF Option) Input impedance: 1MΩ or more -5 to +5V (UTMⅡ/UTMV) Input impedance: 1MΩ or more |
|---|---|
| Accuracy | Non-linearity： within 0.02%FS±1digit Zero drift： within 0.2mV/℃ RTI Gain drift：within 0.01%/℃ |
| Digital low-pass filter |
PASS,3～1kHz |
| A/D converter | Rate ：16000times/sec Resolution：24bit (binary) Approx. 1/30000 against 10V |
| Analog monitor output (Test point / UTF Option) |
Transmitted input voltage |
| Pulse input for rotation speed (open collector input/UTMⅡ/UTMV/UTMⅢ) | |
| Max. rotation speed | Depend on UTMⅡ/ UTMV/ UTMⅢ |
| Min. rotation speed | Selectable from 15, 10, 5, 3, 2rpm (when pulse rate is 4 ppr) Selectable from 60, 40, 20, 12, 8rpm (when pulse rate is 1 ppr) |
| Min. pulse width | 50μs |
| Circuit configuration |
No-voltage contact input (minus common) Connectable to open collector (Ic=Approx. 10mA) |
| Pulse input for rotation speed (Line driver: RS-422A compliant/ UTF option) |
|
| Max. frequency | Depend on UTF |
| Circuit configuration |
Line driver (RS-422A compliant) |
| Encoder input(Pulse input) | UTMⅡ/UTMⅢ Compatible with rotary encoder option |
|---|
| Display section | |
| Display unit | Character height 8mm Numerical display by 7-segment green LED |
|---|---|
| Display content | Switchable numeric display (torque, rotation speed, angle) |
| Display frequency | Selectable from 1, 3 , 6, 13, 25 times/sec. |
| Status display | RUN、SD、RD、ERR |
External signal |
|
| Output signal (2) | Selectable/ configurable Transistor’s open collector output Vceo=30V、 Ic=50mA |
|---|---|
| Input signal (1) | Selectable/ configurable Contact (relay, switch, etc.) or non contact (transistor, photo coupler, etc.) Input is ON when shorted to COM terminal |
| Interface | |
| USB | USB Interface |
|---|---|
| CCL | CC-Link Interface |
| 485 | RS-485 Interface |
| 422 | RS-422A Interface (UTF Option) |
| General performance | |
| Power supply voltage |
DC24V ±15% |
|---|---|
| Power consumption | 6W typ. |
| Operating conditions |
Temperature: Operating temperature range: -10℃ to +50℃, Storage temperature range: -20℃ to +85℃ Humidity: 85%RH or less (non-condensing) |
| Dimensions | 34(W)×88(H)×91(D)mm (Projections excluded) |
| Weight | Approx. 230g |
| Attachments | |
| Quick manual | 2 |
|---|---|
| CC-Link connector | 1 |
| Mini driver | 1 |
| Various I/O connector | 2 |
| Ferrite core | 1 |
Download
|
Product catalogue(PDF)
|
TC80-CCL Product catalogue Download | |
|---|---|---|
|
Operation manual(PDF)
|
|
|
|
External dimention
|
DXF
（ZIP） |
|
|
PDF
|
||
|
Support tools
|
||
|
Software
|
||
- User registration is required to download operation manuals, external dimentions, support tools and software.
- Acrobat Reader software from Adobe Systems is required to view PDF files.