TM301
Torque monitor for UTMⅡ/UTMV
Product outline
UTMII/UTMV can be easily connected to TM400 with the supplied cable. With the built-in battery, it can be operated even without power source. Using with UTMII with rotary encoder option, torque-angle (or displacement) relationship can be monitored. With the compact body and the high sampling speed, it is ideal for field use.
Features
- Torque monitor specialized for UTMⅡ/UTMV.
- Torque, rotation speed and power are displayed simultaneously.
- Hold function (Sample, Peak, Valley, P-P, Average)
- Upper/lower comparators function (ALM HI, HI, OK, LO, ALM LO)
- Data storage function
- Easy connection to UTMⅡ/UTMV with one cable.
- The unit supplies electric power to UTMⅡ/UTMV.
- Variation of torque, rpm, and power can be monitored and saved on PC. (with USB interface option only)
Torque, rotation speed and power are displayed
Specifications
Sensor input for torque｜Drive power supply for UTMⅡ/UTMV｜Pulse input for rotation speed｜Display section｜Setting section｜External I/O section｜General performance｜Attachments
| Sensor input for torque (voltage input) | |
| Input resistance | 1MΩ |
|---|---|
| Signal input range | ±5V |
| Accuracy | Non-linearity : Within 0.02%/FS±1digit Zero drift : Within 0.2mV/℃ RTI Gain drift : Within 0.01%/℃ |
| A/D converter | ･ Speed…300 times/sec. ･ Resolution…24bit (binary) Approx. 1/30000 with respect to 5V |
| Analog filter | Low-pass filter (-6dB/oct) Selectable from 3, 30, 300, and 1kHz. |
| Voltage output | Input voltage cuff (For test point) |
| Drive power supply for UTMⅡ/UTMV | |
| Power supply voltag | DC24V *One UTMⅡ/UTMV at the maximum |
|---|---|
| Pulse input for rotation speed (open collector input) | |
| Maximum input frequency | In accordance with the output frequency of the UTMⅡ/UTMV series |
|---|---|
| Minimum input frequency | Select from 15, 10, 5, 3, or 2 rpm (when pulse rate is 4 ppr) 60, 40, 20, 12, 8 rpm (when pulse rate is 1 ppr) |
| Minimum detection pulse width | 50μs |
| Circuit configuration | No-voltage contact input (minus common) Open collector connectable (Ic＝Approx. 10mA) |
| Display section | |
| Display | Main display : Character height 15mm Numerical display by 7-segment green LED (5-digit+sign) Sub display : Character height 8mm Numerical display by 7-segment green LED (5-digit) |
|---|---|
| Indicated value | Main display : 5-digit -99999 to +99999 Signs : Minus sign on most significant digit Sub display : 5-digit -19999 to +99999 Signs : Minus sign on most significant digit |
| Decimal point | 0, 0.0, 0.00, 0.000 (Only a torque and a power. Rotation speed is nothing) |
| Display frequency | Selectable from 3, 6, 13, and 25 times/sec. |
| Status display | HI / LO / HOLD |
| Setting section | |
| Setting item |
HI/LO limit : HI limit / LO limit / Alarm HI limit / Alarm LO limit Comparison/hold : Operation 1 : Operation 2 : Calibration : Protect/Initializ : |
|---|---|
| Hold | Sample, Peak, Valley, P-P, Average Hold section setting (All section・External signal・External signal+Time・Level+Time) |
| External I/O section | |
| External input (4) |
Hold control / Hold reset / Digital Zero / Record data clear Dry contact input circuit (minus common type), Ic＝10mA or less |
|---|---|
| External output (7) |
HI/LO limit comparison (alarm HI・HI・OK・LO・alarm LO) / Hold complete / RUN Open collector output circuit (sink type), Vceo＝30V (max) Ic＝30mA (max) |
| Interface |
SIF : 2-wire serial interface BCO : BCD parallel data output interface (Option) 232 : RS-232C communication interface (Option) D3V : D/A converter voltage output(3ch) (Option) DAV : D/A converter voltage output (Option) DAI : D/A converter current output (Option) USB : USB interface (Option) * Only one option can be installed. |
| General performance | |
| Power supply voltage | AC100V to 240V(+10%-15%)(free power source) 50/60Hz |
|---|---|
| Power consumption | 14W max |
| Operating conditions | Operation : -10 to +40℃ Storage-40 to +80℃ Humidity : 85%RH or less(non-condensing) |
| Dimensions | 96(W)×96(H)×138(D) mm (Projections excluded) |
| Panel cutout size | 92×92(+1-0)mm |
| Weight | Approx. 1.0kg |
| Attachments | |
| External input/output connector･･････1 AC input cord 3m (with solderless terminal)*･･････1 Cable for UTMⅡ/UTMV connection 2m･･････1 Unit seal･･････1 Connector for BCD output (with BCD output option)･･････1 Operating tool (with D/A converter(3ch) option)･･････1 Mini screwdriver (with D/A converter option)･･････1 Operation manual･･････1 *The attached AC input cord is intended for 100V AC power in Japan. |
|
Option (Only one option can be installed.)
| Model | Description |
| BCO | BCD parallel data output interface |
|---|---|
| 232 | RS-232C communication interface |
| D3V | D/A converter voltage output(3ch) |
| DAV | D/A converter voltage output |
| DAI | D/A converter current output |
| USB | USB interface |
Optional accessories
| Model | Description |
| CA372-I/O | Cable with FCN connector at one-end 3m |
|---|---|
| CA81-USB | miniUSB-computer USB cable 1.8m |
| CAAC2P-B3 | AC Supply cord 3m |
| CAAC3P-CEE7/7-B2 | AC Supply cord (Voltage resistance:250V)2m |
| CATM21-M | Cable for UTMⅡ/UTMV connection 2m |
| CATM51-M | Cable for UTMⅡ/UTMV connection 5m |
| CN34 | D-Sub9p connector for RS-232C |
| CN50 | FCN series I/O connector (with cover) |
| CN51 | BCD output connector |
| CN55 | FCN series I/O connector (with diagonal cover) |
| CN73 | D/A converter(3ch) connector |
| CN90 | Waterproof plastic connector for UTMⅡ/UTMV connection |
| DTC2-PSL | Case for TM301 |
| GMP96x96 | Rubber packing |
Download
|
Product catalogue(PDF)
|
TM301 Product catalogue Download | |
|---|---|---|
|
Operation manual(PDF)
|
||
|
External dimention
|
DXF
（ZIP） |
|
|
PDF
|
||
|
Support tools
|
||
|
Software
|
||
- User registration is required to download operation manuals, external dimentions, support tools and software.
- Acrobat Reader software from Adobe Systems is required to view PDF files.